PPT – FISHING REELS from the Best Brands PowerPoint Presentation, free download – ID

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

X-Protect is a water-resistant technology that comes in several forms and is dependent on the reel category and intended usage of each reel. Contact style makes use of a combination of labyrinth construction, rubber gaskets and grease to strongly prevent water from coming into a certain area of the reel.

This design makes it possible to achieve up to IPX8 level water resistance for the roller clutch of some larger spinning reels. Non-contact style makes use of a labyrinth structure along with a water repellent material that ensures both light rotation and water resistance performance. Compared to larger reels, smaller reels require sensitivity and a sufficient level of water resistance.

The non-contact style protects the reel but does not sacrifice rotation lightness. This advanced protection technology increases the durability of the reel and gives a high level protection in even the toughest conditions. This ensures good performance for a long time, without affecting the smoothness of the reel when rotating.

The Roller Clutch Bearing. This is the most critical area when comes to balancing water resistance without affecting the light and smooth rotation. A surface protection coating causes water to bead preventing water from flowing into the small crevices where it can reach the mechanism of the roller clutch bearing. The Line Roller: A line roller with Core Protect has a one-piece design that provides water resistance and lowmaintenance. The sealed design does not require oil. This prevents corrosion and other problems with the gearing orother internal parts of the reel.

One Piece Bail is a bail arm made from one piece of material, which allows the line to slide very smoothly over it to the line roller. In addition, this one piece construction results in a stronger bail arm, which is much less likely to bend, or even break, under enormous pressure.

The SilentDrive technology encompasses the total redesign of the internal components to reduce microscopic handle play and eliminating noise and any unnatural feeling from the worm shaft drive. The combination of these redesigned components and extremely fine engineering tolerances produces an extremely smooth and silent reeling sensation.

This improves the complete fishing experience of the reel. It also enables the line to be quickly located to the roller when engaging the bail arm after a cast. Through tens of thousands of casting tests and computer simulations, it has been determined that the AR-C spool lip design provides longer casting distances than a standard spool lip design, while preventing backlashes and wind knots.

It also allows the line to flow off the spool in smaller loops during the cast, which means less line slap on the first guide. This makes longer casting possible with a reduced chance of knots. The result is an incredibly smooth drag even at extremely light settings.

This is showed in a number which includes the amount of turns of the rotor degrees in one full rotation of the handle. This is communicated in length of metres m or yards yds and line diameter mm or line strength lb. This is measured in centimetres. This indicates the retrieving speed of the reel. The number indicates the line capacity: a sized spool contains less line than a sized spool.

The number indicates the reel size. We call it Infinity Evolution, but to most its a work of genius! Whichever front drag reel you choose, you can be assured that for quality, value for money and customer experience, SHIMANO leads the way. Experience the featherweight rigid metal rotor made from Aluminium and Mangesium alloys.

The high rigidity of the rotor will allow you to fish at ease without worries of distortion. Sturdy yet light, the reeling motion will feel unimaginably smooth. The Long Stroke Spool design has a longer stroke, compared to conventional spool designs.

This long stroke specification results in longer casting distances. The profile of the rotor is made asymmetrical and the bail arm mechanism, which is usually situated on the same side as the line roller, has been moved to the opposite side. Both of these changes improve the balance.

This contributes to an overall improved experience of the reel with better, lighter and smoother reeling. The increased surface area distributes pressure more evenly across the full face of the teeth as they meet during rotation.

The spool moves up and down very slowly as the rotor wraps line onto it, allowing the line to spool in an almost parallel configuration. This creates a smooth profile that improves line management when casting and also when playing fish. This results in less friction and vibration as line leaves the spool and reduces drag on the lure, which improves casting distance and accuracy.

When playing fish, the line is released from the turning spool more smoothly, increasing control. It is designed to create the perfect tension between the line and the spool and improve line management efficiency, especially when using supple, thin diameter braid and mono. It provides enough initial power spike to set hooks effectively, with enhanced smoothness and durability for a better fish-playing experience.

These reels have been developed and engineered specifically for certain fishing styles. Slow line oscillation wraps the line onto the spool in a more organised way, with the coils of line laying closer to the next one on the spool. On Parallel Body design reels the body of the reel is parallel to the blank of the rod, rather than the reel tilting slightly towards the rod.

The combination of Slow or Super Slow Oscillation and Parallel Body offers the ultimate in distance casting performance. The axel and spool are parallel to the rod, minimising the amount of line slapping onto the blank between the spool and the first guide during the cast.

It makes more precise and longer casting possible, and reduces the potential for tangling because there is less friction and line slap during a cast, especially in the area around the first guide.

The angler can change the drag from free spool to fight settings in a split second. This provides optimal control and quick handling during the take and whilst playing a fish. This helps improve casting performance and especially accuracy by optimising the timing of the line release.

Slower spool oscillation reduces the speed the line travels up and down the spool on the cast. This results in less friction as line leaves the spool and reduced drag on the lead, which improves casting distance and accuracy. Rigid Cast technology balances strength and lightness of the main shaft to withstand the impact of extreme casting force. The angler can change the drag from free spool to fight settings in only a split second. This provides optimal control and quick handling during the take and the fight of a fish.

It only takes a half turn degrees of the drag knob to close the drag. SHIMANO Instant-Drag allows a quick adjustment of the front drag knob to take the reel from a current drag setting to free spool in just half a turn and vice-versa. BENEFIT Spool reducers reduce the line capacity of the spool preventing excessive use of additional line to achieve the correct spooling profile. A minimum of wraps per cycle. This makes almost perfect parallel spooling possible and gives a huge improvement in casting distance and precision.

This produces parallel line spooling and the best casting distance, control and precision possible. Spool reducers are plastic bands which are included with some reels usually reels with a big spool capacity.

They can be clicked on the spool, in order to reduce the spool capacity. Lightweight design, combined with exceptionally direct contact make working lures with a Baitcaster or a small multiplier type reel extremely efficient and rewarding. At the start of the cast, the reel spool has to turn very quickly, while at the end of the cast when the lure almost hits the water the spool has to turn a lot slower to prevent an overrun of line.

The brake regulates the turning speed of the spool, so it will brake the speed during the cast, preventing knots and making accurate trouble-free casting possible. Setting the drag is a very precise job: too much brake will decrease the casting distance drastically, while not enough brake will cause an overrun of line and resulting tangles.

The Digital Control system is a waterproof, self-energizing system which is computer chip controlled. It recharges with each cast and needs no battery or power source. During the initial moments of the cast, the energy generated by the rotation of the spool is stored in the Digital Control circuit board and powers the Digital Braking System on subsequent casts. During the cast, the Digital Braking system calculates and provides the optimal braking force.

BENEFIT This revolutionary system makes accurate and long distance casting possible, while at the same time minimising tangles, knots and overruns. It anticipates hard casting conditions, like fishing in windy weather or casting very light baits. The DC system produces excellent casting performance for both beginner and tournament anglers.

I-DC5 has 2 sets of dial adjustment. With the internal dial, you can select the type of line used. The I-DC4 braking system is an intelligent Digital Control braking system with an easy to use, 4 setting externally adjustable brake dial. This will allow anglers to fish a wide variety of lures, in any conditions, with minimal adjustment to the reel.

SVS Infinity provides easy-to-manage, consistent spool control and brake force. The external adjustment knob provides quick, precise adjustments for either the conditions or when you switch lure size.

FTB is a brake system developed especially for finesse baitcasting reels. The brake unit is usually located on the side of the spool, but the FTB system is outside the spool reducing weight. By turning the knob on the outside of the reel, magnets are moved deeper or shallower into the spool. Deeper means more braking power, shallower means less braking power. This adjusts itself to the rotational speed of the spool during the cast creating the right amount of braking power.

The light weight spool enables long and accurate casts to be made with very light lures. The braking system, with the magnets, is extremely sensitive and can be set very precisely for optimal braking power in every situation. VBS uses centrifugal force rather than magnets to aid controlling the cast. When turned on, the individual brake weights are forced outward at the beginning of the cast, when backlashes most often occur, causing friction that reduces the speed of the spool.

Once the spool speed begins to slow, the pressure with which the brake weights contact the raceway lessens, allowing the spool to continue spinning and improving the casting distance. VBS braking can only be changed on the inside of the reel, there is no external dial. Settings range from zero weights turned on for true free-spool rotation, up to 6 weights turned on for extremely windy conditions and maximum cast control.

This means that whatever the circumstances, you will be able to cast efficiently. Baitcasting reels are left handed or right handed. This is indicated by the number. For example, a reel with size is right handed, a reel with size is left handed. A left handed reel is used by most European anglers. The CoreSolid Body, which is featured on some bait casting reels, integrates the B-Side Plate, level wind guard and frame into one solid once piece construction.

The lightweight MGL Spool features reduced spool inertia, for improved casting distance and accuracy with lighter lures. The addition of a MGL Spool offers increased versatility across a wider range of lure sizes.

BENEFIT More powerful and lighter winding means less effort is needed when retrieving a high-resistance lure or fighting with a big fish.

By changing the supporting pinion gear, rotational resistance is drastically reduced compared to our conventional products without reducing the gear strength. By designing a balanced and uniform thin wall aluminium constructed spool, S3D creates an incredibly smooth feeling when casting and retrieving lures. As with any casting reel, the spool rides on bearings. These bearings have pockets in the frame or side plates which house the bearings and are given some tolerance in order to make the bearings more easily changeable.

While the tolerance is necessary, it allows the bearings to move slightly during casting, leading to the smallest of vibrations that take energy away from the core of the reel and reduce the distance and smoothness of the cast. Silent Tune technology adds small springs under the bearings which keep the bearings in place, ensuring proper alignment and eliminating any movement or vibration that may occur. This technology makes smoother, longer casts possible due to the elimination of vibration.

Super Free was designed to eliminate friction on the spool shaft during the cast. In standard baitcasting reels, when the clutch bar is pressed down, the pinion gear is freed and can drag on the spool shaft creating friction that can limit the length of a cast. With SF, the pinion gear is supported by a ball bearing so that when the clutch is disengaged in preparation for a cast, the pinion gear and spool shaft are kept in perfect alignment.

This not only improves casting distance, it also improves the entire feeling of the reel when in use. Big Lures, 2. Medium Lures, 3. Small Lures and 4.

Finesse Lures. Max Distance mode: Best for calm conditions 2. Fluorocarbon mode: All-round setting for fluorocarbon 4. Skipping mode: stronger braking when skipping baits. Therefore it is imperative to enhance water resistance without impairing the properties of spinning reels designed for saltwater fishing.

Also, the pressure put on the gearing during extreme use can create problems with wear and even failure.

In spinning reels this development reduces the friction of spool oscillation with a special design and combination of parts. As a result, handle rotation resistance is reduced considerably, when compared to a conventional system, resulting in easier winding, even under extreme pressure. Heat Sink technology enables dissipation of excessive heat build-up when the spool is rotating quickly and keeps the heat away from the spool surface and drag washer where it can cause a reduction in drag performance.

BENEFIT When playing fish under extreme pressure, it is quite common for the drag pressure to reduce in resistance as heat builds up in the spool and drag system due to friction. The Heat Sink technology dissipates heat away from important areas and enables maximum drag performance to be maintained for longer.

An additional advantage is it also keeps heat away from your line reducing potential damage. The result is smooth and consistent drag performance throughout the fight. This results in more assured fishplaying, even in the most extreme circumstances.

Supporting the spool with the main shaft and two bearing links in the spool reduces spool flutter to provide stable and smooth drag performance, especially in the initial stage of the fight. X-Shield also increases the life-time and durability of the reel and ensures excellent longevity of performance.

By placing sealing gaskets in critical locations throughout the reel body, SHIMANO is able to create a water resistant structure that can hold up against the toughest conditions, giving excellent protection from water and foreign object ingress. Inside the motor, there is a special strong magnet that can maintain its performance level even at high temperatires. A control function designed to suppress abnormal heat generation of the drag to maintain stable drag performance.

If the drag slips while the motor of the electric reel is on, the gear will idle and cause an abnormal heat generation in the drag area. In order to suppress this heat generation, when the drag is slipping, the motor speed is automatically reduced.

BENEFIT During fights with strong fish in a salt water environment, anglers will keep full drag power and lines keep their breaking strength due the smart heat outflow.

This is a nice feature for a lot of anglers, who like to fish with a baitcasting reel, but who are missing the sound of the drag when fighting a fish. This shifting mechanism is designed so that gearing changes are quick and easy, even when fighting a fish.

The low gear ratio used for high-power retrieves is selected by pushing the button on the base of the handle. Return to the high-speed ratio by sliding the release button along the handle shank. It has an asymmetrical side plate construction where the side plate on the handle side of the reel is larger to accommodate the gears, whilst the opposite side palming is smaller than a conventional side plate for increased comfort and functionality.

The adoption of thicker titanium wire dramatically increases the rigidity and impact resistance of the bail arm. The nature of the metal titanium makes the bail arm lighter and provides excellent corrosion resistance. Exciting Drag Sound is a technology which enables the angler to have a drag sound on a baitcasting or multiplier type reel.

Cross Carbon Drag is made out of a carbon drag washer matrix, which delivers great heat resistance and super smooth drag performance. X Drag is a drag star which is smaller than usual. This is done in order to position the reel handle closer to the body of the reel which increases cranking leverage, rigidity and torque. Just above the rear drag knob there is an adjustment lever. This lever allows the angler to adjust the drag tension during the fight in a very controlled way by moving it to the right or the left to increase or decrease the drag pressure.

A front drag spinning reel has the drag knob located on top of the reel spool. This category is the most popular type of spinning reel. The Water Proof Drag contains rubber gaskets which are placed to protect the drag system.

It seals the drag against intrusion of the elements such as water and dust. This drag material provides a wider range of drag settings, along with very smooth drag performance. The shape and thickness of the aluminium rotor creates high rigidity that results in more fish fighting power. Increased mass of the aluminium rotor generates more inertia resulting in easier fishing of heavy jigs and high resistance lures. Aero Wrap is a worm gear oscillation system with a specially designed pitch to create optimal oscillation speeds for the AR-C spool design.

The one speed oscillation system provides a line-lay with one speed the same speed upwards and downwards. The twospeed oscillation system the spool moves upward quickly and downwards slowly lays the line onto the spool in a precise crisscross pattern that reduces lineto-line friction when casting. This creates a smooth profile thatimproves line management when casting and also when playing fish. A lever drag multiplier has a drag which can be set using a lever at the side of the reel.

Lever drags are designed for big, hard fighting fish. A screw-in handle can be screwed directly into the gearing of the spinning reel. This reduces play and unwanted movement of the handle and gives a better rotational feeling. A star drag multiplier has a drag which can be set using the star at the side of the reel. This is able to create a lot of drag tension. When hooking a large fish, the smoothness of the initial movement of the drag is the most important to avoid line break. The handle grip, made of a comfortable, non-slip rubber, is formed to provide maximum comfort and power.

Rapid Fire Drag is a drag system which is very precise and fast at the same time. It enables adjustment of the drag from heavy to light settings and vice-versa in only half a turn of the drag knob.

These bearings have undergone a special heat treatment resulting in high metal strength. Shielded A-RB bearings use either a rubber shield or stainless steel shield depending on bearing size for the ultimate in corrosion resistance and contaminant protection against sand, salt or dust.

The X Rigid Handle is a cold forged handle shank. The shank and shaft support parts are integrally molded to eliminate deflection. Power loss is eliminated and direct and powerful winding is realised. By using carbon tape, instead of a conventional horizontal fibre sheet, SPIRAL X enhances torsional rigidity without adding extra weight.

Nano resin technology distributes the resin more evenly through the carbon fibres resulting in a stronger, lighter rod. The result is improved casting accuracy, more powerful transmission, increased control of the lure, and improved fish-playing performance.

This construction results in less overlapping of material, which would normally result in a spine and weak spots. The result is improved casting accuracy, more power transmission, increased control of the lure, and improved fish-playing performance. The LT design allows the development of smaller reel bodies with conventionally sized spools, which can be applied without much effort due to the low weight.

The longcast ABS aluminum spool displays a decreased friction resistance during the cast and therefore enables longer casts. Modern design at an outstanding price-performance ratio! The Regal LT reels combine nearly all technical features and advantages of the new LT reel concept at an unbelievable price-quality ratio. The reels are extremely lightweight and provide a smooth rotation that you are usually just experience with much more expensive models.

The Regal LT are real all-round talents that can be used for nearly all types of fresh water fishing from spin fishing to light feeder fishing. The premium majora paint changes its color depending on the angle of light and makes this series to a real eyecatcher.

The new Ninja LT convinces both optically and technically. The ultra-smooth and light rotation is a true highlight. The novel Tough Digigear, which has formerly been used only within much more expensive series, provides the Ninja LT series with an improved power transmission and an even smoother retrieval compared to the previous version. The ATD drag of the Ninja LT provides a considerably improved drag power up to 10kg and an immediate release of the drag without initial resistance — perfect once fished with thin lines and during critical situation during fighting a fish.

The line lay is exemplary and also suitable for the use of extremely thin braided and monofilament lines. Depending on the size, perfectly suited for pike, zander, carp, trout and — in large sizes — also for cod and coalfish. This reel is a real all- rounder for feeder fishing or stalking, for fishing for barbels as well as for spin fishing. Match and Feeder reels 36 The HardbodyZ reel body is the foundation of a permanent solid housing of the gear even at excessive and demanding application.

The Tough Digigear is in charge for a smooth running and is highly resistant. By further optimizing the design as well as the Zaion rotor the weight has been considerably lowered compared with the previous edition TD-X — thus the QD weights only grams! By the MagSealed design the intrusion of water and dirt particles is prevented, which markedly prolongs the lifespan of the reel. With the help of the QD drag system you can react to changing conditions during the fight with the fish within seconds.

The longcast ABS aluminum spool features less friction during the cast and enhances your casting distances. The extra-large anti-reverse lever can be reached easily and quickly, thus enabling convenient backwinding during the fight with the fish. The HardBodyZ aluminum body cares for a permanent distortion-proof housing of the gear, which considerably increases the lifespan of the reel, especially at the application of heavy feeder rigs.

The QD drag system allows you to react to changing fishing conditions within seconds while the Digigear II ensures smooth running and high power transmission during the fight with fish and when retrieving the rig. The longcast ABS aluminum spool enables long and targeted casts.

The Digigear II cares for optimum retrieving power — perfect, when heavy feeder rigs have to be winded in over long distances. The HardBodyZ aluminum body cares for a secure housing of the gear and thus increases the lifespan.

Also thin or braided lines can be securely fixed by the spring-mounted HIP line clip. Thanks to the foldable reel handle, the mounted rod can be conveniently transported in a rod bag. The aluminum reel body cares for optimal housing of the gear and permanent smooth running. The supersized anti reverse lever is easy to grasp at critical situations during the fight with the fish, allowing convenient switching to backwinding.

The longcast ABS aluminum spool offers less friction resistance at the cast and increases the casting distance. The spring-loaded distance control line clip offers optimal safety to act precisely in the targeted area. The large EVA handle knob offers optimal grip and perfect transmission at retrieving. The QD drag system allows instant adoption to critical situations during the fight with the fish.

The smooth and even rotation is a real highlight. The new Tough Digigear, with has formerly been used only at much higher price points and more expensive reels, provides a better power transmission and an even smoother rotation compared to the previous version — ideal for retrieving heavy feeders over great distances. The ATD drag system within the Ninja LT ensures a considerably stronger drag power up to 10kg as well as instantant performance without higher starting resistance.

The Longcast ABS aluminum spool enables extra-long casting distances. The novel 25mm spool stroke combined with the compact reel body, the large spool diameter and the large retrieving power is the perfect choice especially for feeder fishing.

The Zaion reel body cares for an optimal and distortion-proof housing of the gear and permanently smooth running. The 25mm spool stroke in combination with the broad spool ensures a high line retraction. The Zaion reel body cares for optimal distortion-proof housing of the gear and permanently silky-smooth running. The Digigear II cares for optimal power transmission and huge retrieving power — perfect, when heavy rigs have to be retrieved frequently at feeder fishing.

The aluminum one-touch folding handle can be folded easily and thus allows to transport the rod fully rigged in a holdall. The forged longcast ABS spool is very tough and offers optimum casting properties due to the special LC spool rim. The ATD drag system works without starting resistance and provides the required sensitivity to land also large specimen after critical situations during the fight with the fish.

Regardless of specimen hunting with light tackle for zander, carp, eel or tench or medium-heavy feeder fishing — the Emcast BR LT series covers most fields of application due to its design.

The novel Tough Digigear design offers a better power transmission and higher drag power as well as a silky- smooth running. The ATD drag cares for instant working of the drag without starting resistance and offers huge drag power at the same time. The free-spool system can be adjusted very precisely — perfect, when shy fish like trout, eel and zander should not feel any resistance when taking the bait.

Regardless if specimen hunting for zander, carp, eel or trout or medium-heavy feeder fishing — the Black Widow LT series is suited to cover almost any field of application due to its unique design. The concept with a 25mm spool stroke enables the construction of a compact and lightweight reel, which combines the longcasting-benefits of a Big Pit reel. Due to the lighter weight you even can cast more precise and controlled compared to heavier Big Pit reels!

The big spool diameter enables extremely long casting distances and — in combination with the transmission of 5. Additionally, the manual bail turn reliably prevents an unwanted turning during the cast, which can lead to the loss of your rig at powerful casts.

This reel is delivered with a CNC cut aluminum handle and an additional double- handle. Depending on the individual taste, the matching handle can be used. Big Pit Reels 52 The dualism of technical precision and the distinct design leads to an eye-candy that represents a new benchmark at carp fishing.

The Zaion body is in charge for an optimal housing of the gear and cares for permanent silky-smooth running. The CNC-cut gear, made of aircraft-grade aluminum, offers huge retrieving power and facilitates lifting of heavy rigs also over long distances.

The special longcast spool rim reduces friction at the cast and allows longer casting distances. The strong axis bears enough power reserves also at highest strains to guide even large specimen securely to the net. Drag power: 10kg The bail is turned by hand. Big Pit Reels The decent black design with wooden handle knob makes this Big Pit reel a real highlight.

The spool has been milled somewhat deeper to enhance the line capacity — the new spool now offers space for m 0. The main shaft is made of stainless steel and is considerably tougher than at the previous model. Big Pit Reels Drag power: 15kg The bail is turned by hand.

The lightweight Zaion reel body is the foundation of the securely housed gear and guarantees permanently smooth running while the thick axis is milled of special stainless steel and easily resists the high strains of long range carp fishing. The Slow Cross Wrap line lay teaming up with the longcast spool edge is a key requirement for the elevation to the next level of casting performances.

The CNC cut Tough Digigear provides the groundwork for the enormous power transmission during the fight and allows the retrieving of large rigs with ease. Spool Art. The combination of a large and extra- wide spool with a small and compact body allows the design of lightweight and very tough reels with optimum casting characteristics.

The special design of the spool rim has been matched with the properties of the spool cone leading to minimum line friction at the cast, thereby reducing the threat of tanglings significantly. The Zaion reel body ensures a robust housing of the drive and contributes to the low weight. The 25mm spool stroke is unique and allows the design of a small and compact body with long spool. As a result you get the function of classic Big Pit reel with a remarkably lighter reel body. The line capacity of m 0.

By using the new QDM drag system you can adjust the drag power more delicately, perfect for fights with the fish over long distances. The extra-strong stainless-steel axis is extremely durable and offers enough reserves to master also combats with large specimen over long ranges.

The perfect reel for large waters in France, Austria and Italy! The bail is turned by hand. The 45mm spool stroke in combination with the Slow Cross Wrap SCW line lay enables extreme casting distances with minimal friction – ideally suited for long casts. The extra strong stainless steel axis ensures highest strainability and offers enormous power reserves during the fight – during tests in France, our teamanglers could also retrieve catfish up to 2m effortlessly and without damage at the axis.

The Digigear II of the Emblem QD offers a fully convincing ultra-smooth running and an optimal power transmission – ideally suited for retrieving the rig over great distances.

Due to the newly designed longcast edge, the friction during the cast is reduced and thus longer casting distances are possible!

With the QD drag system you can adapt to different fishing and fighting circumstances within seconds. The extra-strong stainless steel axis ensures highest strainability and offers enormous power reserves during the fight – during tests in France, our teamanglers could also land catfish up to 2m effortlessly and without damage at the axis. The Digigear II of the Emblem QD offers a fully convincing ultra- smooth running and an optimal power transmission – ideally suited for retrieving the rig over great distances.

Especially the innovative Slow Cross Wrap line lay cares for frictionless casts and thus optimum casting distances. The extra-thick and distortion- proof stainless steel axis offers highest security at the fight, particularly over short distances, when large specimen have to be directed to the landing net. The Digigear II cares for a silky-smooth running and offers optimum power transmission and remarkable cm line retraction per winding. The QD drag system allows you to react to changing fishing conditions within seconds.

The spring-loaded HIP line clip spares the line and is perfectly suited for repeated and precise targeting of your feeding spot. The Emblem Spod is a synonym for highest durability and toughness at spodding for years now. The Emblem Spod 35 SCW QD has been updated regarding the latest technology and now also offers the SCW line lay In combination with the longcast edge, the casting distance is thus additionally increased.

The 90mm aluminum power handle optimizes the power transmission during retrieving and offers tremendous power reserves to retrieve even big spods over great distances fast and easily. The bail is turned by hand to prevent unwanted turning during the cast. Both metal HIP line clips enable an easy handling during exact casts to the feeding spot and protect the line. Drag power: 15kg Technological features The bail is turned by hand.

The extra-strong and distortion-proof stainless steel axis offers the necessary security, to direct even large specimen during the fight without making compromises and to cast also heavy leads. The Crosscast convinces with its ultra-smooth running, tremendous retrieving power as well as its SCW line lay which enables longer casts due to less friction.

Thanks to the QD drag system you can immediately adapt to different fishing and fighting situations. The longcast edge reduces line friction during the cast and thus enlarges casting distances additionally. Perfect for remote feeding spots.

The round HIP line clip protects the line and is optimally suited when the feeding spot has to be targeted with ultimate accuracy. Due to the transmission of 4. The solid stainless-steel axis offers highest resilience. The Digigear II ensures an enduring smooth running and an optimal power transmission. The HIP line clip protects the line and is optimally suited for exact, repeating cast to your feeding spot.

By combining the longast spool with a 45mm spool stroke also large weights can be cast to far remote spots. The HIP metal line clip spares the line and is perfectly suited for accurate and frequent targeting of fishing spots with heavy spods. The 45mm spool stroke allows extreme casting distances and offers massive retrieving power — perfect, when fishing over long ranges is required.

The LC long casting edge features drastically less friction at the cast and maximizes the casting performance. Thanks to the strong retrieving power also leads of g can be retrieved with ease. The 35mm spool stroke enables maximum distances. The Emcast offers all that at an outstanding price. Due to the special production process and the selected material, DAIWA can offer you a reel with high retrieving power and optimal distortion-proofness at an outstanding price-performance ratio.

Depending on the model, the line capacity is up to m 0. With the Black Widow 25 A the DAIWA engineers designed a distortion-proof reel with high winding power, which features an outstanding price-performance ratio. Sea reels 68 Angler dreams are coming true. For the season an entirely new Saltiga series enters the market, which fully convinces thanks to the application of a high-tech monocoque body matched with a completely new design.

Please visit www. From size on, the bail is turned by hand. As a result, the power transmission and lifespan are significantly increased.

Additionally, also the teeth at the drive wheel are enlarged which leads to a better durability and also prolongs the lifespan. The distortion-proof aluminum body cares for an optimal housing of the gear and ensures permanent smooth running. Depending on the size the BG MQ reels are the proper choice for medium-heavy spin fishing in fresh water – particularly for heavy lures and permanent application – but are also suited for extreme sea fishing for tuna and GT. The sizes and are the fitting powerhouses for medium-heavy and heavy fishing in Norway for large cods and halibut.

By enlarging the teeth in the driving wheel, also the lifespan of the gear is further improved and the MQ design cares for an optimal and distortion-proof housing of the gear within the body. The special coating procedure prevents corrosion under the paint layer. The ATD drag system features premium carbon fiber drag discs and ensures optimum drag performance under strain and without high starting resistance, which additionally enlarges the lifespan, also when frequently applied for extra- tough fights — perfect for medium-sized Tunas, Doggies and GT!

With extra- loud drag clicker! The HardBodyZ reel body, made of aluminum, cares for a distortion-proof housing of the Digigear II and optimal power transmission during the fight with the fish. Especially for the use of braided lines the ABS aluminum spool has been equipped with a central rubber ring, which completely prevents slipping of smooth braided lines under strain. The reel handle is firmly screwed into the reel body and is housed distortion proof and securely — perfect when heavy strains have to be transmitted at sea fishing.

Starting at size these reels are also perfectly suited for the use at heavy jigging or uncompromising fishing for catfish. With ordinary levelwind reels, line coming of the spool ends is forced through the line guide at a sharp angle. The result is casting friction, especially when the line guide is parked on one side of the reel. Conventional levelwind TWS levelwind The reel setting is pre- configured which eliminates the need to adjust the mechanic drag.

Smaller lures can be casted in a highly convenient manner. Perfect for smaller lures. This leads to reduced backlashes and an optimized casting performance. In comparison to the SV concept the magnetic drag comes into play during the final phase of the cast. The surface of the pinion gear is specially treated to prevent electrostatic corrosion.

The Ultimate Tournament Drag ensures a perfect interaction between drag control, drag power and super-soft drawing of the line. CNC milled digitally developed power gear for highest strains. The precision of the gear teeth is tenfold elevated compared to conventional gears. Highly precise casting control system, which prevents tanglings. It controls the centrifugal force of the spool during the first half of the cast, when the threat of tanglings is very high.

Afterwards it reduces the resistance automatically and therefore enables longer casts, since less drag pressure is exerted at the spool. The frame and the lateral parts, which bear the gear are made of Air Metal magnesium, which leads to highest stability and distortion-proofness at a low weight.

The Magforce 3D system offers you the choice, how far the magnets are placed from the spool, therefore adjusting the drag strength. Perfect all-round setting for most applicatons. This enables the characteristic light and smooth running of the Ryoga HL — even under tough strains — and makes it a perfect Big Bait reel.

The ATD drag system with click sound runs without starting resistance and is combined with SiC inlays, which offer tremendous advantages concerning losses while fishing with braided lines. The Double Stopper is a combination of Infinite-System with an additional, mechanical stopper — ideal for great temperature fluctuations and very low temperatures. This gear is further strengthened by larger teeth in the traction wheel but offers nevertheless a very smooth and round functioning due to a special manufacturing procedure.

The Hyper Tough Clutch lever has been optimized to remain safely in its position also at vigorous casts. Due to the Hyper Double Support the pinion gear is mounted via each a ball bearing at both sides, leading to a better and more even power transmission from the handle.

The surface of the pinion gear is specially treated to prevent electrostatic corrosion and to enlarge the lifespan. With drag clicker. Spool diameter: 34mm Perfect for very small and lightweight lures. Also suited for sea fishing! The extremely large teeth of the traction wheel care for an improved power transmission and lifespan of the gear unit while ensuring a smooth running at the same time.

Spool diameter: 36mm Drag power: 5. Perfect for applying crankbaits, fishing in greater depths or for sea fishing. The Hyper Drive Design concept stands for a combination of diverse features that optimize the lifespan and handling of the reel. The new SV Boost drag concept optimizes the casting distance and reduces the threat of backlashes. Due to the SV concept this reel is preadjusted for the use of smaller lures of the g class as well as for casting heavier lures up to 60g without backlashes.

The T-Wing system cares for reduced friction during the cast and optimizes the casting distances. Perfect for surface lures, spinnerbaits and for pelagic fishing with smaller and medium-sized lures. Spool diameter: 34mm Drag power: 4. The Morethan has especially been developed for the usage with braided lines in fresh or salt water. The lightweight G1 duraluminum spool in combination with the tuned Magforce-Z drag system, which is perfectly adapted for braided lines, ensures improved casting distances as well as trouble-free fishing.

The ATD drag system runs without starting resistance and offers additional control with thin braided lines within critical moments during the fight with the fish. Furthermore the spool provides a greater line capacity than its predecessor. Due to the usage of a super lightweight spool with a diameter of only 30mm, the starting resistance is reduced noticeably and thus weights below 5gr can be cast easily. At the same time the spool is strong enough to be fished with strong braided lines of 30lbs and to cast also heavy weights up to 28g.

Thanks to the small spool, the reel body could be designed in a smaller and more compact way — thus the reel is very handy and enables enduring effortless fishing. The integrated TWS system reduces the line friction during the cast and enables additionally longer casts.

The magnesium reel body only weights g! Perfectly suited for finesse fishing. Drag power: 4. This is due to the reduced line friction during the cast, since the line exits the reel at a considerable larger angle, which causes less friction. At retrieving, the T-construction is folded into the reel body and the line is guided over the conventional levelwind system.

This new generation of the T-Wing system caused huge sensations among the scene at its introduction in the USA. Additionally the spool of the Tatula runs extremely smooth and enables great casting distances. Also the further equipment is extraordinary for a baitcast reel within this price segment and convinces with many more elucidated details — focusing on the new Air Rotation system, where the gear is hardly noticeable at retrieving the bait.

The extra-strong brass gear also withstands the use of heavy shads of cm. Thanks to the 7 CRBB this reel is also the proper choice for fishing in brackish water, e. The Air Rotation gear cares for a silky-smooth running. The Air Rotation gear is hardly perceptible during retrieving and ensures an extremely soft running of the spool.

Even smallest lures can be cast easily and with high accuracy. The SV concept additionally prevents the threat of backlashes at the cast. Thus, you can fully concentrate on the cast and the lure presentation. Only when the lure reaches the water surface at the end of the casts, it is advisable to stop the spool shortly with the thumb. The Tatula SV TW is even more compact than the previous models and can easily be enclosed by the hand for daylong fishing.

Additionally, the reel weight has been reduced further to incredible grams! The double stopper design reliably prevents the anti-reverse from turning free at very cold conditions and at extreme strain. The perfect reel for targeting large pikes in springtime in shallow waters with XXL shads using the shallow-screw system.

Suited for lures up to approx. The XSL features a drag power of 11kg. Left hand version Art. The Speed-Shaft system in combination with the finely adjustable magnetic drag furthermore guarantees long casting distances while the Magforce drag system reliably prevents line tanglings. Ideal for vertical and jerkbait fishing. Being alone on the boat, you now can retrieve the bait at the same time while steering the boat. This reel shows its whole power especially during tough fights with halibut and coalfish in Norway — due to its digital depth counter, you can present the lure with the optimal distance to the ground – an invaluable benefit when coalfish predate in the middle water and you need to provide your lure constantly at the same depth!

Thanks to its great gear transmission and its strong Power-Gear you can retrieve your lure for a check at the surface quickly and effordless — you retrieve cm per handle turn! Due to its special construction, this reel is additionally very lightweight and allows enduring effortless fishing.

The maximum drag power of 13kg offers more than enough power to fight even with strong fish. For many years the Tanasensor has been called a paragon for reliability and power among Norway anglers.

Especially the powerful gear is a real benchmark, which successfully has lifted up many large specimen out of great depths over the years. The electronic display with depth counter offers great advantage when fishing in medium depth or over difficult ground, because you always know where your lure is located. The gear offers an enormous power transmission and retrieving power — indestructible under normal fishing conditions!

The Tanasensor is the perfect choice when there is need for power and reliability! The automatic line lay ensures an optimal wrapping of your line — you fully can concentrate on fishing. At final winding in, the last meter of line should not be pulled through to ensure instant working of the line lay. The powerful gear in combination with the high transmission rate of 6. TANACOM Electro reels This strong electric multiplier reel with a 12V engine provides convenient assistance at deep sea fishing for ling, redfish and cusk, when heavy rigs have to be retrieved from great depths.

The premium engine is reliably working even under high strain and offers enough power reserves to lift also big fishes up to the surface. The Tanacom can be operated by hand or via engine. TANACOM Electro reels After the great success of the Tanacom calls for a somewhat larger model with greater line capacity and stronger engine, which can also be applied at greater depths, have grown louder.

The Tanacom offers exactly these features: extreme line capacity and a very robust engine, which reliably pulls your rig to the surface also from great depths. Series Length C. Closed Length Sections Weight No. Guides Page Baitcast Art. Guides Page 12ft 13ft 12ft 3.

According to the slogan: more muscles, less fat. This is our way to construct continuously improved rods. Since this material is very expensive, it is only used for our top rods. The action is ultra fast and the notorious torque is reduced to a minimum.

Usual “Pre Preg” carbon fiber At standard carbon fiber materials the resin content is very high, while the amount of carbon fiber is low. Rods made of this material are heavier, not that well-balanced and feature a slower action than our rods made of HVF or SVF material.

The reduced weight optimizes the rod action – the rod gets essentially faster and resiles clearly faster. Additionally the use of carbon fiber framed guides reduces vibration of the guides during the cast — more precise casts are the consequence. Whoever takes a rod with AGS guides in the hand will realize immediately the dramatic difference to conventional guides and actions.

Thanks to AGS the tip resiles faster. This implies less strain for the blank and results in a clearly improved resilience.

The frame construction reduces the threat of tanglings. Especially at headwind and the use of braided lines the threat of losing lures due to tanglings at the guides is high. AGS guides enable an “escape” of the line at tanglings without knots or loss of the lure.

At our Nanoplus technology the resin material first is enriched with a nanoalloy compound and then is used for connecting the single carbon fibers, thus enabling the design of very lightweight and robust blanks. Comparison of the stiffness of carbon and titanium: Carbon features an approximately 3-fold stiffness compared to titanium and therefore is the ideal material for guide construction — the carbon frames of the AGS guide support the sensitivity of the blank like no other material.

In contrast to conventional carbon fibers, where the fabric structure always is oriented 2-dimensionally, with 3DX 3D-Cross DAIWA has developed a 3-diminsional carbon fiber material. Special carbon fiber material for the improvement of the torsion- resistance. This construction makes the rods stronger and more distortion-proof.

Despite the increased distortion-proof- ness the flexibility is maintained. This implies that X45 rods are not only stronger and cast more precisely, but also support the angler at the presentation of delicate lures and at ending the fight with the fish safely.

This “skeleton” enhances the compression, improves the flexural strength and makes the blank faster. The rod features always the same power transmission — regardless the direction of movement. Additionally the rod features obviously reduced torque — more precise casts are the consequence.

The hexagonal pattern is widely distributed in nature and has ever been the basis for substantial technical innovations. The carbon fiber nano particles within the material increase its stability and reduce its weight. The spigot joint thus can be dimensioned even slimmer. The carbon fibers follow a degree angle.

The consequence is higher strain resistance and an improved bending curve. By applying and combining exclusive DAIWA technologies like Super Compile-X carbon fiber, 3DX carbon fiber material, X45 carbon fiber construction, Nanoplus material and ultra-lightweight AGS carbon fiber guides extremely fast and distortion-proof rods have been created, which are incredibly lightweight and well-balanced. The Morethan Branzino AGS rods instantly resile to the starting position after the cast and thus enable extremely long and accurate casts.

The strong backbone in combination with the fast and sensitive tip action ensures security and supremacy during the fight with strong and large fishes. The two models with 42g casting weight feature a strong and stiff blank and have been exclusively designed for fishing with shads. The two models with 35g casting weight offer a distinct tip action and can be applied for fishing for sea trouts with spoons as well as for medium-heavy fishing for zander and pike with shads of cm.

CW length Art. The spigot joint with V-Joint technology enables the design of especially slim rods with enormously improved bending curve and increased resilience regarding the connections between all different parts.

The X45 construction improves the compression of the blank and makes the whole rod even more distortion-proof — more precise casts and a reduced risk of fractures are the result! The Tournament AGS spinning rods care for an outstanding feeling — the extremely light and distortion-proof AGS guides made of carbon fiber send every movement and contact with the lure, ground or fish instantly to the blank and your hand. The carbon fiber handle sections with casting weights of 14g, 28g and 42g pass every movement of the blank directly to your lower arm and thus open up a completely new dimension of lure control.

The light AGS guides in combination with the carbon fiber handle sections exert enormous influence to the unique action and balance of the blanks — a perfect symbiosis of technologies is the result! The rods are perfectly made for fishing for zander, perch, trout and chub — the fish can easily soak in small and medium softlures with jigheads up to 12g and you instantaneously feel the bite!

The version with a casting weight of 14g is ideally suited as perch, chub and trout rod for fishing with somewhat lighter lures or next to the surface. Fishing for predators at its best! The rods with casting weights of g are made for heavy spinfishing for pike and zander with big softplastic lures and hardbaits and are equipped with an EVA split handle section.

The Hard-EVA within the handle section improves the balance of these powerful spinning rods and guarantees perfect handling and comfort during extreme fights with large specimen! For the Airity spinning rod series, our engineers have drawn on some of the best DAIWA technologies and components ever. The fast HVF Nanoplus blanks with X45 technology is marked by its distinct tip action with strong backbone and thus is especially suited for usage with all kind of softlures.

The X45 carbon fiber construction improves the blanks compression and thus makes it even more distortion-proof — longer and at the same time more precise casts are the result. The admixed carbon fiber nano particles within the material allow to reduce the amount of resin within the high modular HVF carbon fiber further.

Thus the rods get even lighter, faster and even more perfectly balanced. The exclusive V-Joint technology reinforces the spigot joints due to the used BIAS carbon fiber material and form an incredibly even bending curve.

Of course also highest quality standards have been complied for the rod components. Extremely light Fuji K SiC guides belong to the best on the market. The exclusive DAIWA Air Sensor reel seat made of superlight carbon fiber material, premium Hard-EVA material at the handle section and the noble woven carbon fiber screw at the reel seat guarantee reliability and a long lifespan.

Equipped with Seaguide hook keeper. The rod with a casting weight of g is equipped with a sensitive, spliced-in carbon fiber blank and a powerful backbone — ideal for fishing with finesse lures for perch or with small lures in strong currents. Perfect lure control and bite detection are guaranteed! Under the use of casting weights of 15g or 20g, these rods reach their optimal casting performance and lure presentation — ideal for fishing with softplastic lures of cm and jigs of 7.

The Morethan Shad Attack rods have been especially designed for fishing with shads and feature strictly components of highest quality. The extremely fast and lightweight SVF carbon fiber blank transmits every lure action as well as contact with fishes and ground straight to the angler – perfect for scanning the bottom structure and react to soft taps instantly.

The X45 technology at the blank reduces torque to a minimum and allows very long and accurate casts. The V-Joint spigot joint enables the manufacturing of extremely slim blanks and additionally provides a perfect bending curve. Thanks to the design, the Morethan Shad Attack rods appear extraordinarily noble and feature an extremely well-balanced handling. The large model range within this exceptional rod series offers a proper choice for almost all kinds of softbait fishing, e.

Designed with two sectioned EVA handle, ergonomic DAIWA reel seat and woven carbon fiber structure at the handle section, these spinning rods are extraordinarily nobel and lightweight as well as perfectly balanced.

At any times the strong backbone offers enough power to set the hook effectively! This is of biggest importance when catching huge zander or pikes! Big and heavy softlures can be fished perfectly and the special guide position prevents tangling of the line at the tip guide at strong wind and waves — pelagic fish can thus been targeted fast and accurately!

Equipped with Fuji ACS baitcasting reel seat this rod is exclusively designed for fishing from the belly boat, kayak or boat using multiplier and baitcasting reels. Fishing with big lures is naturally very energy-sapping. The Big Bait rods, made of HVF carbon fiber with X45 and Nanoplus technology combine exactly those characteristics, which are necessary for an effortless fishing! The classically designed handle section, made of premium cork, pleases your hand and at the same time provides the perfect lever to do long and precise casts.

The blank fully loads during the cast and thus supports the angler cast by cast. Or experts have spent many hours at the water during the development, testing numerous prototypes until perfect special rods have been constructed! The HVF Nanoplus carbon fiber material enables the construction of very light, slim, fast and — at the same time — extremely resilient blanks. Due to the addition of nano particles, the already small amount of resin has been further reduced.

The blanks got even faster and more lightweight! The X45 carbon fiber construction leads to an improved compression of the blank thanks to the special positioning of the carbon fibers — the blanks are very distortion-proof, enable more precise casts and can be controlled perfectly during the fight and the lure presentation.

Aditionally the rods get more resistance against damages. This special material makes this usually sensitive part of a rod very robust and improves the bending curve at the same time. The Finesse Perch with a casting weight of g features a spliced-in solid carbon fiber tip and a powerful backbone, leading to a perfect transmission of soft taps, lure action or bottom structures right to the angler.

Extremely short upper handles and the innovative Fuji TVS reel seat with lateral pockets allow an instant contact to the blank. The perfect rod for presenting small lures like creature baits on the Flexi-Jig system, mini plugs and many more! The model with g casting weight is equipped with a tubular tip and due to the resulting tip action is the proper choice for aggressive jigging with softplastic lures of all kind, but also does a great job at twitching small and medium-sized hardbaits.

Perfect when large perches have to be targeted in deeper waters or at currents. Casting performance and contact to the lure are outstanding!

The rod with a casting weight up to 42g has been made for fishing with medium lures at slow currents or standing respectively shallow waters. The Power Zander model can cast lures up to 70g effortless and can be used in strong currents or deeper waters. Equipped with a very light and ergonomically shaped Air Sensor reel seat made of carbon fiber material, these rods are extraordinarily handy and enable effortless fishing over hours. The stiff backbone of the HVF blank transmits every action of the lure as well as bites straight to the handle.

The Fuji TVS reel seat allows you to detect everything, what happens at the end of the line and to react accordingly. The soft tip leads to very good casting distances and reliably prevents losses and material overload. Fantastic rods for catching perch, trout and chub! Thanks to their strong backbone, these rods care for a vivid action of twitched hardbaits and reliably transmit the lure action as well as bites to the handle section. The stiff action of the HVF carbon fiber blank allows the angler to choose from all modern presentation styles.

Thanks to its lateral cavities, the Fuji TVS reel seat allows direct contact to the blank and thus also to the lure. The Powermesh series comprises a range of premium and lightweight rods with superior components and latest rod design, which are especially adapted for particular fields of application.

Modern HVF carbon fiber material and X45 carbon fiber design have enabled the development of lightweight, resistant and distortion-proof blanks.

Powermesh rods thus allow precise and long casts as well as uncompromising fighting with the fish. The strong V-Joint cares for an even bending curve. Due to their light weight, the premium Fuji Alconite K-guides prevent tangles and support the fast action of these exceptional rods.

The slim blank with stiff action and strong backbone allows the application of all modern presentation styles. The action of the 2. This rod is also a good choice for vertical jigging. A perfect lure control, lure presentation and bite detection are guaranteed also at difficult surroundings.

Thanks to the strong backbone you can set the hook instantaneously also over great distances. The premium and very lightweight HVF carbon fiber blanks feature the X45 technology and catapult lures of g or g over long distances with ease, thus ensuring a perfect presentation and control.

Maximum fun is guaranteed! The very stiff action allows the optimal presentation of jerkbaits up to g. The 1. Both models feature a trigger reel seat and are designed for the use of multiplier and baitcasting reels.

CW length cl. The name “Tatula” stands for outstanding quality as well as latest technologies and innovation since years.

The accurate scanning of bottom structures is of enormous importance when fishing for perch and zander with softplastic lures. The recognition of extremely hard and soft ground is a huge advantage when it comes to finding the right spots! Also the presentation of softbaits and twitching with hardbaits is considerably easier with a fast and stiff blank.

The Tatula rods unite particularly these features. The fast and very stiff blank made of SVF carbon fiber combined with the exclusive X45 technology of DAIWA allow the design of fast and very tough rods, which almost leave no wish unfulfilled. The V-Joint spigot joint is the foundation of a truly harmonic bending curve and additionally supports the fast and even bending curve of the Tatulas.

Equipped with lightweight Fuji Alconite guides, Fuji reel seat and premium split EVA handle section, these rods appear quite modern and offer large power reserves. A very hard backbone in combination with a very fast action enables astonishing casting distances, perfect lure control and allows setting the hook without delay. Depending on the casting weight these rods are perfectly suited for fishing for pike, zander and perch with both hard and soft baits.

For light and ultra-light fishing at small streams or ponds for trout, chub and perch you can choose between two perfectly-balanced rods of either g or g casting weight. These fast rods with tip action are perfectly suited for fishing with small softbaits, small plugs and spoons! The characteristics of this rod are a distinct tip action in the upper quarter, followed by an extremely stiff backbone. The action of this blank comes best into play at uncompromising twitching of hardbaits, presenting deep running crankbaits and at aggressive jigging with heavy shads!

The distinct and fast tip action of these specialty rods allow the exact scanning of bottom structures using softlures on a jighook or other techniques like the Carolina rig or drop shot rigs. Hunting perches, zanders or pikes can perfectly swallow the lure and the fisherman can react to the “Tock” quickly. The lightweight and slim blank perfectly loads during the cast and provides particular characteristics in its tip and backbone to perfectly set the hook but also buffer quick escapes of large pikes.

The X45 technology applied at the carbon fiber blank considerable improves the blank compression and thus causes a positive effect on the twist resistance — the rods cast fully controlled and precisely and on top are very robust. The HVF blanks of the Ballistic LTD feature a markedly reduced resin content with higher carbon fiber amount, leading to very lightweight and well-balanced rods with a fast action.

Short EVA upper handles and the characteristic lateral pockets within the Fuji TVS reel seat, allow a direct contact to the blank to control the lure action and sense contact to the bottom and even softest taps, which is especially advantageous at softbait fishing but also concering other fishing techniques. When the target fish are hiding down deep or in strong current, these rods allow you to search them with deep running cranks or with heavier jighooks.

Also perfectly applicable for using chatterbaits. The Ballistic X spin rods for heavier casting weights are ideally suited for twitching of hardbaits and jigging of heavy plastic lures – perfect for fishing for perch, pike, asp and zander with stickbaits or when lower water layers shall be scanned with heavy lures. The well-balanced HVF carbon fiber blanks are very handy, react quickly during the fight and offer very long and precise casts thanks to their X45 carbon fiber construction and the Fuji O-guides.

The Ballistic X spinning rods are equipped with Fuji DPS reel seat and Fuji O-guides, so you get premium quality for an outstanding price-performance ratio. The light and extra fast blanks are suitable for twitching of hardbaits like small to medium poppers and plugs, as well as for vertical jigging.

During the fight the fast blanks opens up to a semi-parabolic bending curve and thus absorbs flights and headbutts of powerful salmonids.

The V-joint spigot joint ensures a very even bending curve under strain. Lightweight Seaguide guides with slim Zirconia inlays support the fast resilience and have a meaningful impact on the casting performance of these rods. Incredibly long and accurate casts are possible every time!

The fast and extra-fast taper blanks transmit contact with the bottom or fish as well as the lure action straight into the handle section. The Fuji Skeleton reel seat without upper handle section allows an instant contact to the blank to perceive every action without delay.

The fashionable premium cork handle is very pleasant to operate and cares for a perfect balance even when very lightweight reels are used. The carbon fiber handle section offers great advantages especially when fishing at warmer temperatures and with thin clothing: Lure action, contact to the bottom or soft taps of the fishes are transmitted straightly to the lower arm by the Sensor Jig! Thanks to the carbon fiber handle section every information is forwarded directly to the arm.

Additionally, these rods allow utmost accurate scanning of the bottom structure. Further advantages of this special design are an optimal rod balance, a great surface feel and an extraordinary look of the handle.

The action is characterized by a strong backbone with an appropriately soft tip in the upper quarter of the rod. As a result, the presentation of heavy lures and the fight with large specimen under ambitious conditions are no problem! Also a perfect choice for fishing with the popular chatterbaits! Ideal rods for fishing from the boat! The lightweight rods with tubular tip perfectly load also when using small lures and catapult small soft plastic lures, plugs and spoons to large distances.

Due to the stiff backbone, full lure control and bite detection are ensured also at strong currents — perfect for effective and accurate fishing for perch, trout and chub!

The actions of the Caldia Jiggerspin allow you to scan the bottom very precisely and offer the necessary elasticity to enable perch, zander and pike to swallow the lure without feeling too much resistance.

As a consequence, the hooking of fishes works reliably, no matter whether you are classically jigging or using Texas, Carolina or Drop Shot rigs. Especially the perfect balance of the blank has been the focus at the construction of these rods — for that reason balance weights have been integrated particularly at the handle of the 2.

Convenient fishing for hours and optimal lure control is guaranteed! Consequently, these rods exhibit the perfect characteristics to target remote spots also with small lures of only 3—12g and to set the hook over long distances. The soft tip is ideally suited for sensitive bite detection with the Cheburashka rig. Any contact with the lure, bottom or fish is instantly transmitted to the handle section, enabling the scanning of bottom structures and the immediate reaction to even softest taps.

Perfect for perch, asp, trout or chub! The compact pack size of 67cm or 75cm allows easy transportation in the suitcase or rucksack. Perfectly designed V-Joint connections care for an even bending curve and provide additional toughness.

The balance and action are hard to distinguish from a premium two-sectioned spinning rod. Quality components, like the lightweight titanium oxide guides with slim inlays and the AAA-grade natural cork handle significantly contribute to the pleasant balance of these rods. The high modulus carbon fiber blank transmits the lure action, as well as ground and fish contact, instantly to the handle section and offers enough power to set the hook also over long distances. The semi- parabolic blank excellently loads during the cast and allows enormous casting distances with lures from g.

The soft action of the tip buffers sudden flights, headbutts and jumps easily, especially in the close distance, and reliably prevents unhooking. Thanks to the convenient handling this rod allows fatigue-free fishing over hours.

These tips, which are almost unbreakable under normal fishing conditions, catapult ultra-small lures to good casting distances and reliably indicate also softest taps. The models with 2. Due to the fast blanks the Fuego Camo rods are especially suited for jigging with soft plastic lures. These rods feature a modern look due to the trendy gray color and are equipped with an original Seaguide reel seat and premium camouflage EVA handle.

The reel seat from the Seaguide Alien concept allows instant contact to the blank due to the lateral pockets, which optimize lure presentation and bite detection. The ergonomic shape of the reel seat further guarantees comfortable handling and enables permanent fun at fishing. Equipped with light titanium oxide guides. The action of the rods is designed to facilitate great casting distances with shads, plugs or spoons of 50g or 60g.

Despite their short division in four sections these rods are very fast and durable, feature a comfortable handling and display an even bending curve, which otherwise is only known from two-sectioned rods. The slim and well-balanced HVF carbon fiber blank features a pleasant handling, enables long casts and cares for a precise bite detection.

During the fight the quick blanks offer enough power reserves to direct also large specimen securely. The V-Joint spigot joint cares for an even bending curve and extra stability under strain. Equipped with titanium oxide guides and premium Japan-style EVA handle! These rods are real all-rounders. Ideal for fishing with softplastic lures, plugs, spoons and spinners. The handle section offers great power reserves to be able to force even big fish during the fight.

CW cl. The thin carbon fiber blank is very handy and well balanced and offers a great contact to the lure. Especially when using with soft plastic lures you can perfectly scan the ground conditions and detect every softest tap.

 
 

 

exage products for sale | eBay

 

Disclaimer: The price shown above includes all applicable taxes and fees. The information provided above is for reference purposes only. Products may go out of stock and delivery estimates may change at any time. For additional information, please contact the manufacturer or desertcart customer service. While desertcart makes reasonable efforts to only show products available in your country, some items may be cancelled if they are prohibited for import in Oman.

For more details, please visit our Support Page. Since , desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers.

These reels have many technological advantages and they are not — compared to other synthetic reels — more expensive and in comparison to our traditional reels they have an economic price.

It smoothly and efficiently transmits the power of the handle directly to the rotor. The shape and surface of the gear teeth enable the construction of gears with extraordinary smooth running, smallest resistance and extremely long lifespan. Accuracy max. Like this the line unwinds in big loops and very evenly from the spool and thus prevents the twisting of the line. Thanks to this system also longer casts are possible. The Ultimate Tournament Drag System includes impregnated drag discs, which are about 30 times more durable than normal discs.

The effective drag power is considerably increased compared to normal drag systems. An additional advantage is the reduced start-up resistance – the drag starts working, when the adjusted drag power is reached and drags smoothly and steadily. The ATD drag is excelled by an even more delicate drag transition and as a consequence thereof is perfectly suited for the use of braided lines.

Contrasting to the UTD drag, at the ATD already at the beginning of a strike the drag starts smoothly, then increases to its pre-set drag rating in a fraction of a second, thus eliminating line breakage at the strike.

By the special position and bearing of the oscillation-gear wheels, we improved the smoothness of the gear in comparison to usual systems of similar construction.

Only high- quality parts made of steel with smallest tolerances are used. CRBB ball bearings feature an 12 times higher corrosion resistance than usual ball bearings.

DAIWA continues to live its dream of developing revolutionary fishing reels: Fishing reels with low weight and easy handling, which appear like a genuine part of the body at fishing.

Producing fishing reels tough enough, to withstand even harshest conditions. Now, after a long history of new challenges this dream has come true. LT Technology introduces new, reduced reel dimensions but makes them stronger than ever. Compact body design yet with tougher Digigear drive for the perfect combination of lightness and toughness.

Pick one up and feel it for yourself. A redesigned, smaller profile throughout with a tougher Digigear makes LT our lightest and toughest reels yet.

Former Body size Current model comparison. Task Nr. Carbon composite will make the reels lighter and tougher than ordinary materials. And as they are not metal, they never corrode, even in salt water use. Light, tough and highly durable – the perfect materials for long lasting reels.

We studied all aspects; diameter, thickness, teeth shape and size. We experimented and tested everything one by one, refining and improving each element. LT reels provide a astonishing level of improved max. Current model comparison Ballistic LT D: Since the first spinning reels it was common sense that the body is made up of two parts: The reel body and the body lid.

Thus the body lid has no longer to be secured with a screw and the resulting free space can be used for a larger driving wheel. To put it simple: This design allows the use of larger and thus stronger driving wheels at the same body size. This reel sets a new benchmark regarding strength, weight and reliability.

With mag- nesium frame and MQ body. The new Luvias Airity LT convinces by its components and its extremely light weight — the size weighs only incredible gr and thus is even considerably more lightweight than the DAIWA flagship reel Exist LT — the most lightweight size reel ever created across the LT range!

The semi-shallow spools are literally made for the use of thin braids. Certate — the trusted brand for reliability and superior engineering skills concerning is advancing to the next level Further improved functionality and even tougher, that is the Certate LT — made in Japan. The compact body design houses an enlarged Tough Digigear and delivers a smoother and more durable running.

Monocoque Body A true design marvel at reel construction — our Monocoque body offers an incredibly rigid frame, resistant to torque and distortion under load. This stronger, single part structure is smaller on the outside but larger regarding the provided interior than conventional spinning reels. Aside from that, DAIWA has perfected the reels water resistance and durability by blocking even the most micro level of impurities via the main axis.

By using a lightweight Zaion body in combination with the MQ concept the DAIWA engineers succeeded in developing an extremely lightweight but nevertheless distortion-proof reel that ensures huge retrieving power and durability thanks to the MQ frame. The MQ design allows the implementation of an extra-large drive gear, which is literally made for the permanent and uncompromising lure fishing with braided lines and soft lures.

The milled Tough Digigear offers highest sensitivity and cares for a silky-smooth running to detect even softest taps. The ergonomic Hi-Grip handle knob enables a secure handling even with wet hands. The Airity LT reels feature in total 8 ball bearings. The new Ballistic MQ LT series combines power with light weight and provides dedicated fisherman the optimal foundation for worry-free application at fresh water and at sea fishing.

Thanks to the LT design the reel body can be conceptualized smaller yet more lightweight and contains a considerable enlarged traction wheel, leading to increased retrieving power and better power transmission.

The gear unit is mounted distortion-proof within the MQ body and offers a permanent smooth running also under high strain. The ABS aluminum longcast spool is supported by two ball bearings at the axis. Thus, the ATD drag starts with even less friction resistance and cares for optimum drag performance also when thin lines are used. By using the extremely lightweight and distortion-proof Zaion material for the body as well as for the rotor the DAIWA engineers could reduce the weight of the reel even more and enhance the retrieving power and toughness at the same time.

The CNC-cut Tough Digigear offers a silky-smooth running combined with enormous power, which allows the permanent and convenient application of big lures. The ATD power drag is in charge for the enormous sensitivity and ensures an even drag power without starting resistance. The Mag Sealed design of the axis prevents the intrusion of water and dirt particles and therefore perfectly avoids corrosion of the interior components.

The milled aluminum handle is mounted directly into the reel body and thus features instant contact to the drive gear. The special design of the ABS longcast spool reduces friction when casting, enabling you to reach greater distances. The LT reels are distinctly lighter and at the same time offer more power than the previous models. The dimensions of the reel body have been scaled down while the retrieving power is improved by the new drive gear construction. The distortion-proof Zaion reel body secures safe housing of the gear unit and supports the low weight of the reel.

The ATD drag system features a continuous and even drag power without starting resistance. The CNC cut aluminum handle is firmly screwed into the drive gear, leaving no room for gaps.

The MagSealed system prevents the intrusion of water via the shaft — perfect for sea fishing — while the CNC cut Tough Digigear supports optimal retrieve power and permanent durability. This reel provides huge winding power and an optimal housing of the gear. The extremely delicate running allows utmost sensitive lure presentation when fishing for pike, zander and perch. Thanks to the aluminum body, the reel is highly strainable and is also the proper choice for feeder fishing, where reels are stressed permanently during retrieving.

By applying the MagSealed design the intrusion of water and dirt particles via the main axis, which goes along with corrosion, is perfectly prevented. Taking into account the 5 CRBB ball bearings, this reel is also perfectly suited for fishing for seatrout and seabass.

Size additionally is very well applicable for light jigging for cod and coalfish in the Baltic Sea and in Norway. Thanks to its novel design the forged aluminum Long Cast ABS spool features almost no friction resistance during the cast and enables long casting distances. The semi-shallow spools are particularly useful for the application with braided lines. The innovative Tough Digigear design additionally cares for a better power transmission and increased toughness.

The ATD drag allows instant working of the drag without starting resistance and offers huge drag power. Thanks to the LT construction, the Caldia LT is considerably lighter than the previous series and features greater drag power.

The outstanding smooth and subtle rotation of the Caldia LT will convince already at the first handle turn. Thanks to the newly designed drive gear, a better power transmission and retrieving power are guaranteed.

The MagSealed construction prevents the intrusion of saltwater and dust and results in a distinctly longer lifespan of the gear with continuously smooth retrieval. The high grade Zaion body provides a perfect and distortion-proof housing of the gear unit. Thanks to the wide range of models, you will find the right model for nearly all kinds of lure fishing, from ultra-light to heavy. The MagSealed construction prevents the intrusion of water and dirt particles via the shaft and ensures a long lifespan of the drive gear with a permanent smooth and light retrieval.

The ATD drag works with a minimal starting resistance and offers perfect control especially during fighting critical fish — perfect when thin braided lines are used. The latest Tough Digigear construction enables an improved power transmission and longer durability.

The Freams reels are made for fishing in fresh water as well as for fishing for seatrouts or light jigging for cod, pollack and coalfish. The Next Generation LT! With the application of the novel Zaion V composite material, DAIWA was able to design the latest generation of the highly successful Exceler LT series considerably stronger and lighter than ever before.

The distortion- proof Zaion V material offers markedly improved toughness going along with reduced weight at the same time. By using this material, the gear is securely housed in the reel body and cares for a silky-smooth running. Due to the LT design combined with the Tough Digigear the retrieving power and power transmission are elevated, which results in a prolonged lifespan. The ATD drag works without starting resistance and offers enormous drag power. The longcast ABS spool made of Air aluminum with optimized spool rim reduces friction when casting, enabling you to reach greater distances.

The aluminum handle is straightly attached to the reel body. By using a new material combination, Zaion V, the popular Fuego LT reel series becomes even lighter and tougher than the previous edition. The MagSealed design reliably prevents the intrusion of saltwater and dirt particles via the axis and contributes to a considerable prolonged lifespan of the reel. The Tough Digigear allows a better power transmission and ensures higher strainability at a reduced size with lower weight.

The ATD drag guarantees a smooth working of the drag without starting resistance and offers optimized drag power going along with high sensitivity at the same time. The Zaion V composite additionally contributes to an increased toughness and an improved transmission of the retrieving power. The Tough Digigear with enlarged drive wheel is the key asset for the smooth running and utmost resilience. The ATD drag provides highest sensitivity and works without starting resistance.

The LT design allows the development of smaller reel bodies with conventionally sized spools, which can be applied without much effort due to the low weight. The longcast ABS aluminum spool displays a decreased friction resistance during the cast and therefore enables longer casts. Modern design at an outstanding price-performance ratio! The Regal LT reels combine nearly all technical features and advantages of the new LT reel concept at an unbelievable price-quality ratio.

The reels are extremely lightweight and provide a smooth rotation that you are usually just experience with much more expensive models. The Regal LT are real all-round talents that can be used for nearly all types of fresh water fishing from spin fishing to light feeder fishing. The premium majora paint changes its color depending on the angle of light and makes this series to a real eyecatcher.

The new Ninja LT convinces both optically and technically. The ultra-smooth and light rotation is a true highlight. The novel Tough Digigear, which has formerly been used only within much more expensive series, provides the Ninja LT series with an improved power transmission and an even smoother retrieval compared to the previous version.

The ATD drag of the Ninja LT provides a considerably improved drag power up to 10kg and an immediate release of the drag without initial resistance — perfect once fished with thin lines and during critical situation during fighting a fish. The line lay is exemplary and also suitable for the use of extremely thin braided and monofilament lines. Depending on the size, perfectly suited for pike, zander, carp, trout and — in large sizes — also for cod and coalfish.

This reel is a real all- rounder for feeder fishing or stalking, for fishing for barbels as well as for spin fishing. Match and Feeder reels 36 The HardbodyZ reel body is the foundation of a permanent solid housing of the gear even at excessive and demanding application.

The Tough Digigear is in charge for a smooth running and is highly resistant. By further optimizing the design as well as the Zaion rotor the weight has been considerably lowered compared with the previous edition TD-X — thus the QD weights only grams! By the MagSealed design the intrusion of water and dirt particles is prevented, which markedly prolongs the lifespan of the reel. With the help of the QD drag system you can react to changing conditions during the fight with the fish within seconds.

The longcast ABS aluminum spool features less friction during the cast and enhances your casting distances. The extra-large anti-reverse lever can be reached easily and quickly, thus enabling convenient backwinding during the fight with the fish. The HardBodyZ aluminum body cares for a permanent distortion-proof housing of the gear, which considerably increases the lifespan of the reel, especially at the application of heavy feeder rigs. The QD drag system allows you to react to changing fishing conditions within seconds while the Digigear II ensures smooth running and high power transmission during the fight with fish and when retrieving the rig.

The longcast ABS aluminum spool enables long and targeted casts. The Digigear II cares for optimum retrieving power — perfect, when heavy feeder rigs have to be winded in over long distances. The HardBodyZ aluminum body cares for a secure housing of the gear and thus increases the lifespan.

Also thin or braided lines can be securely fixed by the spring-mounted HIP line clip. Thanks to the foldable reel handle, the mounted rod can be conveniently transported in a rod bag. The aluminum reel body cares for optimal housing of the gear and permanent smooth running. The supersized anti reverse lever is easy to grasp at critical situations during the fight with the fish, allowing convenient switching to backwinding.

The longcast ABS aluminum spool offers less friction resistance at the cast and increases the casting distance. The spring-loaded distance control line clip offers optimal safety to act precisely in the targeted area.

The large EVA handle knob offers optimal grip and perfect transmission at retrieving. The QD drag system allows instant adoption to critical situations during the fight with the fish.

The smooth and even rotation is a real highlight. The new Tough Digigear, with has formerly been used only at much higher price points and more expensive reels, provides a better power transmission and an even smoother rotation compared to the previous version — ideal for retrieving heavy feeders over great distances.

The ATD drag system within the Ninja LT ensures a considerably stronger drag power up to 10kg as well as instantant performance without higher starting resistance. The Longcast ABS aluminum spool enables extra-long casting distances. The novel 25mm spool stroke combined with the compact reel body, the large spool diameter and the large retrieving power is the perfect choice especially for feeder fishing. The Zaion reel body cares for an optimal and distortion-proof housing of the gear and permanently smooth running.

The 25mm spool stroke in combination with the broad spool ensures a high line retraction. The Zaion reel body cares for optimal distortion-proof housing of the gear and permanently silky-smooth running. The Digigear II cares for optimal power transmission and huge retrieving power — perfect, when heavy rigs have to be retrieved frequently at feeder fishing.

The aluminum one-touch folding handle can be folded easily and thus allows to transport the rod fully rigged in a holdall. The forged longcast ABS spool is very tough and offers optimum casting properties due to the special LC spool rim. The ATD drag system works without starting resistance and provides the required sensitivity to land also large specimen after critical situations during the fight with the fish.

Regardless of specimen hunting with light tackle for zander, carp, eel or tench or medium-heavy feeder fishing — the Emcast BR LT series covers most fields of application due to its design. The novel Tough Digigear design offers a better power transmission and higher drag power as well as a silky- smooth running. The ATD drag cares for instant working of the drag without starting resistance and offers huge drag power at the same time. The free-spool system can be adjusted very precisely — perfect, when shy fish like trout, eel and zander should not feel any resistance when taking the bait.

Regardless if specimen hunting for zander, carp, eel or trout or medium-heavy feeder fishing — the Black Widow LT series is suited to cover almost any field of application due to its unique design.

The concept with a 25mm spool stroke enables the construction of a compact and lightweight reel, which combines the longcasting-benefits of a Big Pit reel. Due to the lighter weight you even can cast more precise and controlled compared to heavier Big Pit reels! The big spool diameter enables extremely long casting distances and — in combination with the transmission of 5.

Additionally, the manual bail turn reliably prevents an unwanted turning during the cast, which can lead to the loss of your rig at powerful casts. This reel is delivered with a CNC cut aluminum handle and an additional double- handle. Depending on the individual taste, the matching handle can be used. Big Pit Reels 52 The dualism of technical precision and the distinct design leads to an eye-candy that represents a new benchmark at carp fishing.

The Zaion body is in charge for an optimal housing of the gear and cares for permanent silky-smooth running. The CNC-cut gear, made of aircraft-grade aluminum, offers huge retrieving power and facilitates lifting of heavy rigs also over long distances. The special longcast spool rim reduces friction at the cast and allows longer casting distances. The strong axis bears enough power reserves also at highest strains to guide even large specimen securely to the net.

Drag power: 10kg The bail is turned by hand. Big Pit Reels The decent black design with wooden handle knob makes this Big Pit reel a real highlight.

The spool has been milled somewhat deeper to enhance the line capacity — the new spool now offers space for m 0. The main shaft is made of stainless steel and is considerably tougher than at the previous model. Big Pit Reels Drag power: 15kg The bail is turned by hand. Possono essere cliccati sulla bobina, per ridurne la capienza. Un minimo di avvolgimenti per ciclo. Ci vuole solo mezzo giro gradi del pomello frizione per aprire o chiudere. Il design ultraleggero, in combinazione con il contatto diretto con il filo permettono di controllare perfettamente gli artificiali, sia con un baitcaster che con un piccolo moltiplicatore.

Si ricarica ad ogni lancio e non necessita di batteria o fonte di alimentazione. Durante il lancio, il sistema Digital Braking calcola e fornisce la forza frenante ottimale. Anticipa condizioni di lancio difficili, come vento forte o il lancio di esche molto leggere. I-DC5 ha 2 set di regolazione, una interna e una esterna. Nylon, 2. Fluorocarbon, 3. Questo permette alla bobina, ultraleggera, di girare con un attrito bassissimo. Le regolazioni possono essere fatte da una rotella esterna.

La bobina leggera consente di effettuare lanci lunghi e precisi con esche molto leggere. Il sistema VBS agisce sulla forza centrifuga della bobina, ridistribuendo i pesi per creare resistenza. Questa funzione permette di scongiurare ogni sorta di fuorigiro della bobina. Le impostazioni vanno da zero pesi attivati per una vera rotazione a bobina libera, fino a 6 pesi attivati per condizioni estremamente ventose e il massimo controllo del lancio.

Mancino significa che la rotazione della manovella viene eseguita con la mano sinistra, quindi la canna viene tenuta dalla mano destra dei pescatore.

Dei due cuscinetti che supportano il pignone, quello sul lato della bobina ha la massima resistenza alla rotazione. In quasi tutti i mulinelli, la bobina gira su cuscinetti. Questa tolleranza, consente ai cuscinetti di spostarsi leggermente durante le fasi di recupero, producendo a volte fastidiose vibrazioni della bobina e riducendo la scorrevolezza.

La tecnologia Heat Sink consente la dissipazione del calore in eccesso quando la bobina ruota rapidamente e traferendo il calore lontano dalla superficie della bobina e pomello frizione, punti particolare dove il surriscaldamento potrebbe causare cali di prestazioni. VANTAGGI Solitamente il surriscaldamento prolungato della frizione causa una diminuzione della potenza della stessa, considerevole e proporzionale al livello di calore. Heat Sink Drag permette di mantenere la frizione invariata e performante senza dove essere ulteriormente regolata.

Lo stile senza contatto protegge il mulinello ma non sacrifica la leggerezza di rotazione. If you are a match or pleasure angler looking for the best quality while working with a tight budget, the extremely affordable AERO BB reel is a great option and includes an anti-reverse facility for playing fish by back winding. Available in three sizes , and to cover most float fishing situations, and ideal for light to heavy feeder fishing for larger fish like carp and bream, this reel range balances perfectly with the AERO X1 and AERO X3 rod ranges.

Feeder anglers will also appreciate the easy to use round metal line clip, which is perfect for accurate casting. This combination is renowned for powerful efficient winding and long lasting reliability, ensuring your reel will maintain its peak performance almost indefinitely.

The AERO X7 is a highly technical range of top feeder rods which combine some of the very latest carbon technology with precise custom designed actions. Perfect for serious match anglers who are looking for maximum performance, the range covers all feeder fishing requirements.

Available in three different options Finesse, Precision and Distance , the AERO X7 will cover all of your feeder fishing requirements from short range light line fishing up to ultra long range large still water or river fishing. This results in a range of super lightweight, slim, strong rods, with ultra responsive actions.

These have a progressive action and are versatile enough to use for all medium range feeder fishing. The highly specialised fast action long casting Distance Feeder comes in three versions. All models feature 3 complete built-in quivertip top sections for a seamless action.

The AERO X5 rod range represents a excellent combination of performance, visual presentation and great value for money. The advanced carbon blanks are available in Feeder, Float and Pellet Waggler options, giving total coverage for anglers wanting a matching set-up. The balance and feel of all models is superb, with the Match Float and Pellet Waggler models being some of the very best available, at any cost.

The Precision Feeder models cast with remarkable accuracy and the Distance Feeder models contain so real powerhouses in the form of the Distance Heavy Power Feeder models which can comfortably cast 5oz g making them perfect for the largest, most powerful rivers. The feeder rods do everything you would expect of a high quality range and offer excellent casting and fish-playing characteristics, whilst having the versatility of 3 interchangeable quivertips.

The Match Float models are wonderfully light and responsive, whilst the Pellet Waggler models play fish with complete assurance and control. All models are fitted with Seaguide XOG antitangle guides that have been selected and spaced to suit each models intended use. With models to cover all feeder and fIoat fishing work, on both commercial waters fishing for carp, or natural venues fishing for silver fish, the AERO X1 rods are made from full carbon blanks and redefine quality in their price class.

Remarkably, the AERO X1 rods are built on full carbon blanks which is the reason why they feel so lightweight, well balanced and responsive. Like their much more expensive brothers in the AERO range, all of the rods have custom designed actions to suit the type of fishing they are designed for.

Within the AERO X1 range you will find two short length parabolic action Finesse feeder models, two mid-length progressive action Precision feeder rods, two fast action Distance feeder rods and a super powerful Distance Power feeder model. All models come with 2 interchangeable quivertips to cover different conditions.